Frequently Asked Questions

saorbuga-control

Turning On / Off

Press and Hold the ‘Play / Pause’ button for approximately 3 seconds to turn the headwear ON.
When it turns ON, the LED light will flash blue.

Press and Hold the ‘Play / Pause’ button for approximately 3 seconds to turn the headwear OFF.
When it turns OFF, the LED light will flash red and will then turn off.
 

Pairing a Device

Step 1
Press and Hold the ‘Play / Pause’ button for approximately 5 seconds until the LED light starts flashing red and blue.
The headwear is now in discovery mode and ready to be paired.

Step 2
Turn on Bluetooth on the device to be paired, search for ‘Saorbuga’ and select connect / pair.
The LED light will flash blue when paired.
Enter ‘0000’ on any device that requests a password.

Once successfully paired, the device and headwear will automatically connect.
 

Playing Music or Other Audio

Press the ‘Play / Pause’ button to play or pause music or other audio.
Press the ‘-’ button to skip to the previous track/chapter.
Press the ‘+’ button to skip to the next track/chapter.
 

Taking / Making Calls

Press the ‘Play / Pause’ button to answer an incoming call or to hang-up.
Press the ‘Play / Pause’ twice to redial the last dialled number in the phone’s call log.
 

Volume Control

Long Press the ‘-’ button to decrease the volume. A brief tone will indicate that the headwear has reached it’s minimum volume.
Long Press the ‘+’ button to increase the volume. A brief tone will indicate that the headwear has reached it’s maximum volume.
 

Charging

Using the supplied micro-USB cable, connect the headwear, via the charging port on the bottom of the control unit, to a PC / Laptop / compatible USB charging device. The LED light will be solid red while charging; it will turn off when fully charged.

saorbuga-charge

Washing Instructions

Remove the control unit and speakers before washing.
There is a small opening at the rear of the headwear; the control unit and speakers can be gently removed through this.
Hand Wash Only.